Banner/Decal Install

1) clean the area you plan on installing a decal or banner. you can use glass cleaner, rubbing alcohol, spit (not recommended but we dont judge). just make sure to get rid of all the nasty dirt & oil. 

2) once dry, line up your decal wherever your heart desires. make sure it fits where you want it, otherwise.. itll probably look like shit.

3) peel back the protective backing to expose the adhesive side. (be GENTLE, shes fragile) 

4) flip the decal down onto the desired surface, press it down from the middle, squeegee outwards (the pros probably have a squeegee, newbees, a credit card works)

5) work & smooth out all the air bubbles. if you think you got them all, you probably didn't. 

6) once you got all those bubbles out, SLOWLY peel back the transfer tape. SLOWLY. AT A SHARP ANGLE. if parts of the design peel up, dont freak out. squeegee it down again, then keep peeling. 

7) press down/rub each area with your finger once the transfer tape has been removed. if it looks like shit, its on you. 

8) rep it. wait at least 24 hours for it to set prior to windshield wiper use or washing your car.